Easy-On™ BackFlip™ FPC Kits

Molex offers a wide variety of connectors for flat flexible cable (FFC) and flexible printed circuitry (FPC). These miniature SMT connectors come in various fine-pitch options and include push and flip-type actuators, which are pre-assembled covers that secure the connection between the FFC-FPC and the connector terminals. Molex is the only connector company to offer a 0.25mm (.010") pitch connector (photo right), which saves about 40% of space compared to 0.30mm (.012") pitch types, and is the smallest FPC connector in the world, in terms of combined depth, height and length.

2 Kits Found.

Kit Part Number	Category	Solution	Connector Family	Description	MSRP

76650-5001	Wire-to-Board	Flex Off the Board	HandyLink®, PicoBlade™, FPC, FFC/FPC, Easy-On™ BackFlip™ FPC, Easy-On™ Type FPC, Micro HDMI, microSD, Pico-Clasp™, Pico-EZmate™, USB On-The-Go (OTG) FPC Molex FPC offers one of the broadest selections of high density FPC connectors high pin count applications. Molex applied its existing Easy On™ actuator technologies to create a robust connector that has a strong latch and is easy to use. FFC/FPC One of the industrys broadest selections of high density FFC/FPC connectors for Flat Panel Display and other high pin count applications. Molex applied its existing Easy On™ actuator technologies to create a robust connector that has a strong latch and is easy to use. Easy-On™ BackFlip™ FPC Molex offers a wide variety of connectors for flat flexible cable (FFC) and flexible printed circuitry (FPC). These miniature SMT connectors come in various fine-pitch options and include push and flip-type actuators, which are pre-assembled covers that secure the connection between the FFC-FPC and the connector terminals. Molex is the only connector company to offer a 0.25mm (.010\\\") pitch connector (photo right), which saves about 40% of space compared to 0.30mm (.012\\\") pitch types, and is the smallest FPC connector in the world, in terms of combined depth, height and length. Easy-On™ Type FPC Molexs line of microminiature SMT FFC/FPC connectors include features to meet a wide variety of space and application-specific needs. Molex also offers a broad range of ultra low-profile SMT FFC/FPC connectors for tight-packaging applications. Molex is continually developing lower-profile and higher-density features to meet the downsizing needs of electronic equipment makers. New features recently added to Molexs Microminiature FFC/FPC range include dual-contacts to eliminate the need to source different top and bottom mount versions, narrow width versions for further space savings and various cable tab and actuator locking styles to provide additional cable alignment and retention. Micro HDMI Molex leads the industry as the first manufacturer of the HDMI* Micro connector, the worlds smallest commoditized I/O solution for consumer electronics and portable hand-held device makers. Molexs HDMI Micro connector is a 19-pin, 0.40mm (.016\\\") pitch interconnect, in a 6.50mm (.256\\\") by 2.90mm (.114\\\") stainless steel shell. The connector offers all the advantages of the HDMI 1.4 specification and is half the size of the current Mini connector. The miniature footprint and low-profile height offer significant space savings. HDMI, the HDMI Logo, and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. microSD* Get Improved Card Ejection Control With Our Newest microSD Card Connectors. Molex has expanded its broad line of microSD* connectors to include new versions that reduce memory card fly-out and sticking problems in mobile and compact devices. Available in various profiles, the new versions include a detect terminal with a wiping function to assure good electrical contact. Various features are employed to provide smooth and controlled card ejection.microSD is a trademark of the SD Card Association Pico-Clasp™* The new 1.00mm (.039\\\") pitch wire-to-board Pico-Clasp™ connector system from Molex was developed for various connections in Flat Panel Displays (FPD). The compact (smallest pitch wire-to-board connector with positive lock), small circuit size features of this system also make it ideal for other applications such as Notebook PCs and other compact devices. Pico-EZmate™ Pico-EZmate™, Molexs new 1.20mm (.047\\\") pitch connectors are compact and low profile, offering a mated height of just 1.40mm (.055\\\") for miniature wire-to- board applications. The Pico-EZmate system includes secure locking features between the receptacle housing and header, along with an audible click to ensure mating. The receptacle is mated vertically with the header, which enables easy placement in tight packaging applications. The system is available in 2 to 5 circuits and ideal for various applications such as mobile phones, notebook PCs, portable audio players and other compact mobile devices. USB On-The-Go (OTG) Molexs USB On-The-Go (OTG) connectors and cable assemblies help enable mobile devices such as digital cameras, PDAs, audio players, printers and cellular phones to exchange data directly without the need for a host PC. All Molex USB OTG connectors are compatible with the On-The-Go supplement (Rev. 1.0) to the USB 2.0 specification, and operate at speeds up to 480Mbps.', 400)">	Right Angle SMT Receptacle, Vertical SMT Header and Cable	$74.00
76650-5003	Wire/Device-to-Board	Flex Off the Board, High Speed	SlimStack™, Easy-On™ BackFlip™ FPC, Easy-On™ Type FPC, Micro HDMI, microSD, Camera Socket, SIM, Micro-Coaxial Easy-On™ Type FPC Molexs line of microminiature SMT FFC/FPC connectors include features to meet a wide variety of space and application-specific needs. Molex also offers a broad range of ultra low-profile SMT FFC/FPC connectors for tight-packaging applications. Molex is continually developing lower-profile and higher-density features to meet the downsizing needs of electronic equipment makers. New features recently added to Molexs Microminiature FFC/FPC range include dual-contacts to eliminate the need to source different top and bottom mount versions, narrow width versions for further space savings and various cable tab and actuator locking styles to provide additional cable alignment and retention. Micro HDMI Molex leads the industry as the first manufacturer of the HDMI* Micro connector, the worlds smallest commoditized I/O solution for consumer electronics and portable hand-held device makers. Molexs HDMI Micro connector is a 19-pin, 0.40mm (.016\\\") pitch interconnect, in a 6.50mm (.256\\\") by 2.90mm (.114\\\") stainless steel shell. The connector offers all the advantages of the HDMI 1.4 specification and is half the size of the current Mini connector. The miniature footprint and low-profile height offer significant space savings. HDMI, the HDMI Logo, and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. microSD* Get Improved Card Ejection Control With Our Newest microSD Card Connectors. Molex has expanded its broad line of microSD* connectors to include new versions that reduce memory card fly-out and sticking problems in mobile and compact devices. Available in various profiles, the new versions include a detect terminal with a wiping function to assure good electrical contact. Various features are employed to provide smooth and controlled card ejection.microSD is a trademark of the SD Card Association Camera Socket* Molexs Mobile Phone Camera Sockets Offer Versatility for Mounting Camera Modules. Molex offers a wide range of socket configurations that includes application extraction tooling to disengage the camera module from the socket.Visual transmission is via the camera module connected to the camera socket. The entire assembly is either soldered onto flex or PCB of the mobile phone. These sockets allow mobile phone makers to reduce their bills-of-material (BOM) due to the sockets compact design and simple assembly process. Another major benefit arising from the size of the sockets is the reduction in space. SIM Molex offers the SIM and Mega-SIM block type card connectors for mobile phone markets. This release covers the block-type SIM connector. In this design, the SIM card is integrated into the mobile application via this connector. SIM (Subscriber Identification Module) card which is used for billings, security and number storage purposes. Molex in, close collaboration with its customer has developed a range of SIM card connectors that feature a range of standard options plus the ability to custom design parts in specific applications. Micro-Coaxial Molexs Micro-Coaxial connector is a very small cost effective RF ultra-miniature connector that is compatible with U.FL® connectors. The cable mount right angle plug is only available terminated, either as a pigtail or as full cable assembly. *U.FL is a registered trademark of Hirose', 400)">	Telecom-Mobile SMT Industry Solution Kit	$44.50